HK sort roller chains

Downsizing Your Program with Greater Power Chains
HK type roller chains conform to H form of ANSI, and their thickness of inner and outer website link plates are equal to these of the upcoming more substantial dimension chain. Therefore, HK form roller chains are increased in tensile strength by about 20%and in optimum allowable load by about 15% than people of conventional roller chains. Since the fat of the chains can be bigger, HK style roller chains are appropriate for your application of heavy duty at very low speed.
Recommended employs
?Optimal for locations where higher power is needed but big and heavier chains can not be applied.
Choice of chains
Pick a correct HK form roller chain based on “Low-speed selection”
For your maximum allowable load, see the following table of dimensions.
HK style roller chains are available up to triplex.
Sprockets
Use common sprockets for a simplex HK roller chain Because the transverse pitches are greater than individuals of typical chains in the case of duplex or triplex, common sprockets can not be applied. Refer towards the sprocket tooth profiles for HK
Connecting website link and offset hyperlink
The tensile power of connecting hyperlinks and offset hyperlinks are listed over the left, however the greatest allowable load is reduce than that from the base chain. Please seek the advice of us ought to you’ve got any questions. It is actually recommended to work with the connecting link of interference-fitted (FJ, HJ)
Hardly ever make the holes from the connecting plate bigger and in no way make the pins thinner to facilitate the function for fitting the pins to the connecting plate, because otherwise the fatigue power is going to be lowered.
Choice of chains
Select a suitable HK sort roller chain according to “Low-speed selection”
To the highest allowable load, see the following table of dimensions.
HK sort roller chains are available as much as triplex.
Sprockets
Use normal sprockets for any simplex HK roller chain Since the transverse pitches are bigger than people of regular chains in the case of duplex or triplex, common sprockets can’t be employed. Refer towards the sprocket tooth profiles for HK
Connecting hyperlink and offset hyperlink
The tensile power of connecting hyperlinks and offset back links are listed over the left, however the maximum allowable load is lower than that in the base chain. Please talk to us should really you have any concerns. It is encouraged to use the connecting hyperlink of interference-fitted (FJ, HJ)
Under no circumstances make the holes of the connecting plate larger and hardly ever make the pins thinner to facilitate the perform for fitting the pins in to the connecting plate, considering that otherwise the fatigue power might be lowered.