Materials Managing Power UNIT one
This energy unit is made to the fork lift marketplace, consisting of highly efficient gear pump, DC motor, manual increase and lower valve, tank, ect. The up and down movement are managed from the lever on the guide release valve, and that is equipped with an electric switch to activate the motor. The lowing velocity is controlled from the strain compensated flow handle valve.
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean all the hydraulic parts concerned in advance of installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
4. Oil shifting is needed just after the first 100 operation hrs, afterwards the moment every 3000 hrs.
5. The energy unit proven is built to be mounted horizontally.
Materials Handling Power UNIT 2
This power unit attributes energy up gravity down circuit. Activate the start solenoid to begin the motor to lift the machine. The lowing motion is activated from the solenoid valve together with the decreasing speed managed from the strain compensated movement management valve. Items of this series is often widely used in the field of logistic units for example fork lift, mini lift table, etc.
1. The duty of this power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned ahead of mounting the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which ought to also be clean and free of charge of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is needed soon after the initial 100 operation hrs,afterwards once each 3000 hrs.
five. The power unit needs to be mounted horizontally.