Equipped using the zero leak bidirectional checking sole-noid valves, this power unit is made for that operation of two independent circuits. Which are respectively for that key and subordinate platforms of your double scissors lift. Two cut-off valves are employed for reducing the machine manually in situation of power loss. If a lot more independent circuits are expected to your application please get hold of us for availability.
Remark: one. Please consult our revenue engineer for your different pump displacement, motor electrical power or tank capability.
2. CSA or UL licensed motors can be found upon request.
one. The AC motor is of S3 duty cycle, which could only perform intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean the many hydraulic components concerned prior to set up of the power unit.
three. Viscosity from the oil shoud be 15~46 cst,along with the oil should be clean and cost-free of impurities,N46 hydraulic oil is proposed.
four. The power unit really should be mounted vertically.
5. Check the oil degree in the tank following the initial operating with the electrical power unit.
6. Oil changing is required immediately after the first 100 operation hours,afterwards the moment every 3000 hours.
Power UNITS FOR DOUBLE-SCISSORS LIFT