We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Product Description

Wet and Dry Process Cement Rotary Kiln from China supplier
 

Application Industry:
Cement Plant, Steel Mill, Chemical Plant & Incinerator

Technical Characteristics:
 Kiln body is made of high quality composed of carbon steel or alloy steel plate and automatic welding;
 Tyre, support roller, open gear adopts alloy cast steel;
 Sliding bearing with large gap not scraping tile bearing;                
 Transmission device adopts hard tooth surface reducer, flexible diaphragm coupling, dc motor;
  Adopts hydraulic gear wheel;
  Preheater scales were used respectively to view of kiln head, and cylinder pressure tight seal;    
  A slow drive device.

Cement Rotary Kiln Processes Wet and Dry Cement Rotary Kiln
With the arrival of rotary kilns, cement manufacturing processes became sharply defined according to the form in which the raw materials are fed to the kiln. Raw materials were either ground with addition of water, to form a slurry containing typically 30-45% water, or they were ground dry, to form a powder or “raw meal”.

In the Wet Process, the kiln system is fed with liquid slurry, the water then being evaporated in the kiln.
In the Semi-Wet Process, raw material is prepared as a slurry, but a substantial proportion (50-80%) of the water is mechanically removed, usually by filtration, and the resulting “filter cake” is fed to the kiln system.
In the Dry Process, the kiln system is fed with dry raw meal powder.
In the Semi-Dry Process, a limited amount of water (10-15%) is added to dry raw meal so that it can be nodulised, and the damp nodules are fed to the kiln system.

Technical parameter for cement rotary kiln :

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

QTP125 (TCT6513-8)  Self-Erecting Construction Building topless Tower Crane

1. Hoisting mechanism: Three-speed, reducing mechanism, light load high speed, heavy load intermediate speed and non-load low speed.

2. The slewing mechanism: Planet gear speed reducer, fluid coupling, slewing brake device, steady starting, accurate position, compact structure.

3. The trolley mechanism: Planet gear speed reducer, Three-speed motor driving

4. New moment limiter: Outside adjustable, easy adjust and safe can be governed by a special person after adjusting

5. Cabin: Developed on the basis of the human engineering principle, linkage control desk.

6. Full set of safety protection equipments

Welcome any comments and inquiry about construction machinery tower crane QTP125(TCT6513-8)

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

large wood chip/grass/ fuel pelletizing machine 

Sawdust Pellet Making Machine Factory Introduction: 
Tongfu wood pellet machine with a group of dynamic engineers full of passion and vitality,advanced EPT and production equipment,has been committed to feed machinery,grass machinery,biological fertilizer equipment and automation control equipment,design,manufacture and promotion.
With rich and practical experience,constant innovation and full responsibility to customers,we are doing perfect on every project and every itme with our thoughtful consideration.During the mutual development with customers,we are enjoying great sucess with customers to make customers satisfied.We provide clients with high quality products and fast services.we welcome new and regular customers from all over the world to visit our factory at any time.

Sawdust Pellet Making Machine Features: 
MZLH Wood Pellet Machine is the key equipment in complete pellet production line.it compress dry sawdust to pellets directly without using any binder.
Ring die type pellet mill is suitable for large scale production because of its super quality and long working life.All of our ring die type adopt gear-driving and couping fastening design,which lead to 10-15% higher output than belt- transmission structure.
1) High efficient gear drive, insure the biggest energy transfer;
2) Cast iron gate, stainless chute, strong corrosion resistance, long service time.
3) The feeder is driven by variable frequency motor, convenient for adjusting feeding quantity, and insure feed evenly.
4) High quality gearbox and high precision driving hole.
5) Use three quick handling precision casting hoop, assemble and disassembled the ring die conveniently and quickly.
6) Feeder use variable, Variable pitch anti coking arch structure. Speed adjusting control by frequency conversion
7) Motor and gear shaft adopt new type falk flexible coupling, assemble and disassembled conveniently, reliable drive, high efficient.
8) High efficiency driving gear and gear shaft adopt carburizing and quenching, processed by hard gear surface technique. Stable transmission. Low noise. Long service life.

Sawdust Pellet Making Machine Advantages:
-The motor use the China famous Wannan or from Siemens Beide brand.
-The wear bearing is made from SKF/NSK
-Driving Gear adopts the high precision gear transmission structure.
-The ring die adopts the hoop fastening method, which is increasing the speed of discharge comparing with the past bolt fastening method.
-Ring die can be make both by Alloy steel or SS material with different price and production purpose.which improve the anti-abrasion of the ring die and roller more than 10 times, it can save the production cost heavily.

Sawdust Pellet Making Machine Specifications:

Sawdust Pellet Making Machine Application:
Woodiness materials(wood logs/chips/branches/sawdust/shavings), agriculture 
biomass waste(rice straw, wheat straw, cotton straw, rice husk, corn stalk, sunflower stalk,etc),peanut shell, leaves, bamboo sawdust, sugar cane, waste paper,  grass, etc.
1. Structure: Compact structure, easy operation, installation and maintenance; 
2. Ring Mode: Equipped with different aperture ring modes; 
3. Conditioner: Standard and large stainless steel conditioner can be chosen; 
4. Special Design: Stainless steel discharge chute and door closure, Anti-corrosion and durable;  
5. Feeder: Strong full stainless steel feeder, feed smoothly, to prevent the plugging material;  
6. Application: Suitable for the cotton seed, straw, alfalfa, wood, sawdust, biomass and other wood 

We also produce complete pellet production line: 
1.Wood Chips Machine:The main cutting materials are undersized log, residues for wood cutting & processing (such as branches, slab, strip, Core log, waste veneer, etc.), and it can also be used to cutting non-wood materials (such as sugarcane, reed, bamboo, etc).
2.Hammer Mill:apply for all kinds of straw,or all kinds of wood
3.Dryer:including hot airflow type dryer and rotary type dryer,for different market and need,we design you different proposal
4.Conveyor
5.Cooler:with vibration screener
6.Packing machine:with automatic weight and sewing,packing from 5kg per bag to 50kg per bag

 
Sawdust Pellet Making Machine Packing&Shipping
1.Wooden or metal case according to specific size of each Wood Pellet Making Machine
   we twine thick plastic coating for each  Wood Pellet Making Machine.
2.Tight the equipment in the truck without space to ensure no rubbing during the transportation.

FAQ
1) what about the size of the final wood pellet product? 
 the size is adjustable according to your requirement.
 the diameter range of the wood pellet is ø6-10 mm by using different ring die mould. 
 the length of the wood pellet could be adjusted on the machine.
 2) What is the suitable moisture (water content) of the raw material that easy to make pellet?
 the ideal moisture range is from 15%  to 18% . 
 3) will you dispatch engineer to install the wood pellet machine (production line)? 
 Yes. we will dispatch engineer to do the service just based on the requirement of customers. 

OUR SERVICE
 Reply your inquiry within 24 working hours. 
 Experienced staffs answer all your question in professional and fluent English. 
 Customized design is available.
 Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers.

 
  Please contact us freely to get more information about the product.
   

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Product Description
EPT High Precision Custom Forging Spline Shaft
The shaft is a kind of mechanical transmission, which transmits mechanical torque. There is a longitudinal keyway on the outer surface of the shaft, and the rotating member sleeved on the shaft also has a corresponding keyway, which can keep rotating synchronously with the shaft. While rotating, some can also slide longitudinally on the shaft, such as gearbox shifting gears.

We can make customers’ satisfactory products according to the samples or drawings provided by customers. For the completion of a product, we also need to know his material, heat treatment requirements and surface treatment requirements. We are a factory with 40 years of manufacturing experience, welcome to consult.

The advantage of our shaft
1 High carrying capacity
2 Good orientation
3 Small stress concentration
4 Convenient processing, high precision with grinding method
5 High strength and long life

EPT Manufacturing Co., Ltd. is a specialized supplier of a full range of motor shafts, gears, Flanges(Couplings), gear racks, sprockets, pulley, machined parts and so on.

Due to our sincerity in offering best service to our clients, understanding of your needs and overriding sense of responsibility toward filling ordering requirements, we have obtained the EPT of buyers worldwide. Having accumulated precious experience in cooperating with foreign customers, our products are selling well in the American, European, South American and Asian markets.Our products are manufactured by modern computerized machinery and equipment. Meanwhile, our products are manufactured according to high quality standards, and complying with the international advanced standard criteria.

With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.

Additionally, we also can design and make non-standard products to meet customers’ special requirements. Quality and credit are the bases that make a corporation alive. We will provide best services and high quality products with all sincerity. If you need any information or samples, please contact us and you will have our soon reply.

FAQ
1)Are you trading company or manufacturer?
We are factory.
 
2)How can I customize my products?
Attach your drawing with details(surface treatment,material,quantity and special requirements etc.)
 
3)How long can I get the quotation?
We will give you the quotation within 48 hours(considering the time difference)
 
4)How long will you produce the parts?
Generally it is 5-10 days if the goods are in stock. Or it is 15-25 days if the goods are not in stock, it’s according to quantity.
 
5)Do you provide samples? Is it free or extra?
Yes, we could offer the sample, the samples and shipping costs need to be borne by the client.
 
6)What is your terms of payment?
Payment≤1000 USD, 100% in advance. Payment≥1000 USD, 30% T/T in advance, balance before shipment. If you have any questions, please don’t hesitate to contact us.
 
7)What if the products we received are not good?

Contact us without hesitation, our special after-sales service will take the responsibility.

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

We – EPG Group the largest couplings and gears manufacturing unit in China with five various branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Bevel gearboxes are encased in sturdy solid steel housings and have hardened bevel gears pairs with EPT toothing and amply dimensioned rolling bearings. EPT bevel gears have the significant advantage of quite favourable meshing characteristics (high speak to ratio). They are for that reason specifically effectively suited for procedure beneath substantial load aspects and when the greatest smoothness of operating and a large degree of transmission precision are required. All gearboxes could be put in in any mounting placement and may possibly have mounting holes on all sides.
Bevel gearboxes Operational factorLow loading/shock-cost-free: Filling machines, elevators, light-weight screw conveyors, gentle conveyor belts, blowers, small agitators, manage equipment, assembly strains, auxiliary drives for equipment resources, centrifuges, packaging machinery.Medium loading/mild shocks: Reel winders, agitators, plate conveyors, calenders, lifts, mixers, balancing equipment, hefty-duty conveyor belts, sheet metallic bending equipment, street-developing machinery, planing machines, shears, extruders, principal drives for machine instruments, kneading machines, weaving looms, mild table rollers.Heavy load/weighty shocks: Excavators, large-obligation mixers, presses, muller mixers, rolling mills, weighty-obligation table rollers, chilly reduction mills, stone crushers, eccentric presses, cutter heads, folding devices, rubber belt conveyors (batch masses), bark peeling drums, operate ning gears, punching presses, piston pumps, rotary furnaces, mills, plate filters.

How Does A Compact Bevel Gearbox Work?

Compact Cubic Gearboxes Films For Buyers Orders

* Malaysia consumers bevel 90 diploma gearbox one:1 ratio at 300rpm 600rpm 900rpm 1200rpm 1500rpm pace Movie:
https:// /observe?v=MwfmJaiH_4k
* Germany buyer spiral-bevel gears one:one ratio proper angle gearbox with 4-way(3 output shafts) Video:
https:// /view?v=wEv8GRmuluo
*  Nigeria consumer 1:one 90° proper angle large duty equipment box, large EPT bevel equipment box 3 shafts Movie:
https:// /observe?v=5aH9zmhpJy0
* Thailand consumer bevel gear containers three:1 ratio JTP140 90 diploma transmission gearbox three to one Online video:
https:// /look at?v=BAXXH7X74kc
* Malaysia client 4 10-ton jacks and 4 JTP140 gearboxes for motorized worm gear screw lift desk Video:
https:// /observe?v=z_GpDOLi6Ek
* Australia client screw jack self locking system with inverted 2.5 ton screw jacks and JTP90 gearboxes Video:
https:// /observe?v=DSXcVQg2FB8
*  France consumer four shaft gearbox 1:one ratio right angle gearbox four way 22mm ninety degree gear drives Online video:
https:// /look at?v=aZyIoBF3T7U
*  Indonesia buyer reduction gearbox 2:1 ratio correct angle EPT bevel gear push Online video:
https:// /view?v=f-aorIKpP7Q
*  Usa client large speed correct angle travel 1:one ratio 90 degree higher pace equipment bins Video:
https:// /observe?v=Lc378SwnMCY
*  Mexico consumer JTP65 miniature EPT bevel gearbox one:1 ratio three way screening Movie:
https:// /look at?v=K1GmYyQ6tww
*  One particular enter two output equipment packing containers JTP90 bevel gears 90 equipment box twin output Online video:
https:// /observe?v=96WMv4VgVtI
*  Brazil consumer JTP110 Two-way A few-way Appropriate Angle Gearbox 1:one Ratio Video:
https:// /view?v=PPYO3A4QB-M
*  India Faridabad buyers JTP110 angel gearbox generate 1:one 22mm shaft ninety diploma angle equipment containers Video:
https:// /look at?v=Hv9-LEJ_LRc
* Thailand consumer 90 diploma equipment push box,correct ange one:1 ratio equipment reducer Movie:
https:// /view?v=aI_b-2AcCDE
* Canada client acme screw jack 2 ton vacation nut with JTP90 correct angle gearbox and basic safety coupling Online video:
https:// /observe?v=MZxQMNY3mmE
* Slovenia customer ninety degree gearbox 1:one ratio, correct angle gearbox 1 to 1 ratio Video clip:
https:// /observe?v=C2ji5jDxEtk
* Brazil consumer bevel 90 diploma gearbox one:1 examination video ahead of cargo Movie:
https:// /look at?v=QzgTLFLrBlM
* Turkey customer top top quality twenty five kn 30×6 spindle rotating trapezoidal thread screw jacks 360mm Online video:
https:// /view?v=WE4s9dXZVoQ
* United states buyer inverted screw jack five ton with 32mm shaft angle gearbox for 3 points lift method Video:
https:// /view?v=thLyUWLFt80
* Malaysia customer servo motor pushed EPT screw elevate system with lifting techniques components Video:
https:// /look at?v=L7BZidOf_o8
* France buyer 5ton screw mechanism for handbook table carry/worm equipment hand crank elevate lower system Video clip:
https:// /look at?v=pgSYcd8t3-Y
* Belgium Geel consumer miniature motorized system elevate,screw raise systems mini jacks gearboxes Online video:
https:// /view?v=fJYWw8Rvo3Y
* Queensland Australia client six-jacks screw jacking programs with equipment for desk raise technique Video clip:
https:// /watch?v=a4m3Gb3G-D8
* a hundred% basic safety deals & a hundred% regular exporting plywood cases supplies films:
https:// /view?v=9Nqe3mE1CyE

Shipment and Packing Pictures 
Transport:
one. EPT freight: seaport to seaport, value conditions CIF, FOB, EXW, CFR and many others.
two. Air freight: airport to airport, price tag conditions EXW, CRF and so on.
3. Air courier: DHL, FEDEX, UPS, TNT door to doorway shipment, cost terms DDU, CPT etc.
Packing: 
a hundred% standard exporting plywood cases. 
Be aware: Worldwide Exporting Regular Wood Material with Free of charge Fumigation.

JACTON Advantages
1. Worldwide normal components for All JACTON brand items. We insist on selecting brand suppliers to source the high high quality raw resources to handle the making procedure. Optimization consistently the production processes, inspecting in each website link and managing production website.
two. one hundred% high quality certain with double quality inspections. The top quality inspection by good quality inspectors from processing to finished merchandise as the very first time. Ahead of packing, the corresponding revenue engineers must inspect the orders pursuing the paper drawings, purchase portions and specific markings in the bill or income contracts as the next time. After that, fill in the inspection report with signature and organization stamp.
three. 100% security transportation. Packing with EPT regular export plywood cases components (cost-free fumigation), interior packing with epe foams to stop products swaying and outer packing with iron sheets and fasteners to fasten the deals.
4. Internationl product sales engineers have expert knowledge and abilities on our common products and provider. They have enough capability to remedy the basic technological problem quickly what ever by telephone, on the internet chat, face to experience communications.
5. All the common goods with 2d CAD Drawings (PDF, DWG and DXF formats), and 3D CAD Models (Stage, STP, Design, IGS, PRT and CATParT formats).
6. Custom made layout offered, OEM support available, Free engineering advice, Cost-free rates accessible and Customer label obtainable.
7. Inspection equipments incorporate motor with inverter drive technique, peak adjustmemt motorized lifting technique, coordinate measuring machines, outside micrometers, inside micrometers, depth calipers, vernier calipers, digital calipers, hardness testers, electronic sounds meters, industrial infrared thermometers, digital speed measuring instruments, electronic multimeters, and high precision clamp electronic ammeter and so on. 
eight. Processing with modern day superior devices this kind of as CNC gear hobbing equipment, CNC flank grinding devices, CNC cylindrical grinding devices, multi-axis CNC milling equipment, CNC lathes and other folks equipments.

Concluded Assignments
one. Theatrical answers stage and orchestra platform lifts tasks. Buyers are from France, Australia, Netherlands, United Kingdom, Spain and Canada. 
two. Hydro EPT electrical power station assignments and drinking water conservancy initiatives. Consumers are from Vietnam, Australia, Malaysia, Russian Federation, Nepal, Pakistan, Belgium, United States and United Kingdom. 
three. Plane maintenance platforms and docking methods assignments. Customers are from Pakistan, Singapore and United Arab Emirates.  
four. Solar panel tracking program tasks. Clients are from Spain, India and Canada. 
5. Bolted metal storage tanks and silos lifting answers. Customers are from South Africa, United States, Mexico, Russian Federation, Brazil and Vietnam. 
6. Dish antenna elevation and azimuth positioning initiatives. Clients are from Singapore, Malaysia and United States. 
seven. Railway wagon projects. Clients are from South Africa. 
8. Beverage can production traces. Customers are from Netherlands, United States, Thailand and Indonesia. 
nine. Steel factories generation traces. Customers are from Iran, United States and Turkey. 
ten. Ongoing PU sandwich panel manufacturing lines. Consumers are from Thailand and United Kingdom.  

JACTON Customers Regions(Nations)
1. American Nations: United States, Mexico, Canada, Chile, Xihu (West Lake) Dis.via, Brazil, Colombia, Dominican Republic, Honduras, Costa Rica, Panama, Puerto Rico, Jamaica, Trinidad and Tobago, Aruba, Argentina, Peru, Venezuela.
two. European Countries: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
three. Asian Countries: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Nepal, Yemen, ZheJiang , Sri Lanka, Israel, Jordan, Kuwait, Qatar.
four. Oceanian Nations: Australia, New Zealand, Fiji.
five. African Nations: South Africa, Egypt, Ethiopia, Nigeria, Kenya, Tanzania. 

JACTON Goods Checklist
1. Manual Screw Jacks, EPT Screw Jacks.
2. Screw Jacks Sequence: JT sequence acme screw jacks, JTC sequence cubic screw jacks, JTW sequence equipment screw jacks, JTM sequence worm screw jacks, JTB collection ball screw jacks, JTD series cubic ball screw jacks, JSS series stainless metal screw jacks, JTS collection bevel gear screw jacks, Non-standard series screw jacks. 
three. Bevel Gearboxes Collection: JT series bevel gearboxes, JTP collection cubic bevel gearboxes, JTA series aluminum bevel gearboxes, JTH collection hollow shaft bevel gearboxes, BSS sequence stainless steel bevel gearboxes.  
4. Lifting Techniques and Techniques Equipment: two-jacks systems, three-jacks programs, four-jacks systems, six-jacks methods, 8-jacks methods. Equipment cover couplings, common joints, cardan shafts, connecting shafts, EPT motors, geared motors and reducers, hand wheel with crank handles, pillow block bearings, flange block bearings, rod finish bearings, cease nuts, restrict switches, safety nut, vacation nuts, linear shafts and bearings, linear guides and bearings, telescopic spring covers, bellows boot, protecting tube, trunnion adapter plates, trunnion mounting brackets, motor flanges, rotary encoders, potentiometers, frequency inverters and place indicators and many others.
five. EPT Linear Actuators Series: Parallel weighty responsibility linear actuators, In-line hefty duty linear actuators.
six. Geared Motors and Velocity Reducers Series: helical gearmotors R series, helical bevel gearmotors K series, parallel shaft helical gearmotors F series, helical worm gearmotors S series, small AC gear motor series and worm equipment motor reducer series.

Speak to Details
JACTON Industry Co.,Ltd (VAT No.: 9144190007026567X3, registered Funds 500000CNY) is a leading company and supplier of Screw Jacks (Mechanical Actuators), Bevel Gearboxes, Lifting Programs, EPT Linear Actuators, Gearmotors and Velocity Reducers, and Other people Linear Motion and Electricity Transmission Merchandise in China. We are Alibaba, Created-In-China and SGS (Serial NO.: QIP-ASI192186) audited company and provider. We also have a strict top quality program, with senior engineers, experienced expert workers and practiced revenue groups, we persistently supply the higher quality equipments to satisfy the customers electro-mechanical actuation, lifting and positioning needs. JACTON Industry assures high quality, dependability, functionality and price for present day demanding industrial apps.
Site (English):
Web site (English):
Internet site (Chinese): cn

/ The use of authentic gear manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our firm and the listed EPT areas contained herein are not sponsored, approved, or produced by the OEM. /

We – EPG Team the most significant couplings and gears factory in China with 5 different branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /

We function on this product for a lot more than ten many years and could offer 1 stop answer on the hose coupling and pipe fittings. We mostly supply these couplings to our customer. This kind of as Camlock coupling, Air hose coupling, Bauer coupling, hearth fighting couplings ( Stroz coupling, Guillenmin couplings, John Morris couplings, Machino coupling, Barcelona coupling, Forest couplings, fireplace nozzles), pipe fittings(stainless steel pipe fittings, malleable iron pipe fittings, flanges, sanitary pipe fittings) and valves ( ball valve, gate valve, sanitary butterfly valve ) and so on.

Adavantage of Tiger Clamp hose clamps:

Great abrasion resistant, gentle weight, inexpensive value
Help save time compared with flanged or threaded fittings
No tools needed and make the work simple
Security sealing for fluids, powders and pellets,Light-weight weight and durable 
Could keep the transfers protected with out any hurt or any hazards.

In depth description:

merchandise	Tiger hose clamps
materials	zinc plated stainless steel 201/304/316.
dimensions	11/2″ to 10″  for typical size.
software	Stainless steel hose clamp can be employed with silicone hose. Germany kind screw band worm generate hose clamps is mostly employed in cars, tractors, ships, gasoline motor, and so on every single kind of mechanical unit for oil, gasoline, hydraulic hose connector, numerous sorts of rubber tube interface must be part of elements fastening.
Place of origin	ZheJiang , China
Package	Plastic bag and Cartons then Pallet
advantage	fast, safey and no want tools
Shipping	By sea, By air and By specific
Lead time	withinn 35-forty five times soon after confiming the standard purchase

Company Details:

Main Merchandise:

When you decide on the camlock couplings, please verify the details such as:

1, Sorts and Size
two, Content
three, Thread
4, Seals
five, Presuure and Tempreture

OUR SERVIC

Pre-sale services
one.We have inventory and could deliver merchandise inside brief time.
two.OEM order are recognized, emblem printing are offered.
three.Great High quality + Factory Value + Quick Reaction + Reliable Service, is what we are attempting greatest to offer you.
four.All of our products are developed by our specialist workman and we have our large-function-result foreign trade crew, you can completely imagine our service.   

After you decide on:
one. We will check cheapest shipping and delivery price and make invoice to you at after.
2. Check good quality and package deal again, then send out out to seaport at 1-2 weekdays right after your payment
three. Electronic mail you the tracking no., and aid to chase the parcels right up until you signed them and update you the circumstance. 
Right after-sale support
1.We are really happy that clients give us some suggestion for value and merchandise.
two.If you have any question,you should contact us freely by E-mail or Phone or Whatsapp or Skpye.
 

FAQ

Q: Do you offer samples ? is it cost-free or additional ?
A: Indeed, we could provide the sample for free of charge demand and want your aspect pay the price of freight.

Q: How prolonged is your supply time?
A: Typically it is five-10 times if the merchandise are in stock. Or it is twenty five-35 days if the products are not in inventory, it is in accordance to amount.

Q. what is your payment term? 
A: T/T 30% payment in progress, balance to be paid before shipment. or L/C. Or West Union, Paypal and Income Gram if little worth.

Q: what is your main market?
A: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe. 

Q: Can I have my personal EPT solution?
A: Of course, we can provide brand Print and deal desiged based in our MOQ.

Get in touch with us

/ The use of original tools manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our firm and the detailed EPT parts contained herein are not sponsored, approved, or made by the OEM. /

We – EPG Team the most significant couplings and gears factory in China with five various branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /

AX series airplane bearing AX0614

Quick Particulars:
Structure: Jaw / Spider
Versatile or Rigid: Versatile
Regular or Nonstandard: Standard
Material: Aluminium
Model Identify: YD
Place of Origin: ZheJiang , China (Mainland)
Certificate: ISO9001:2008
Bore forming: Produced by CNC centres
Distinctive Function: Beautiful Workmanship
Bore Measurement: Meet inch dimension
Invertory: In stock
Spider shade: Purple (Eco-friendly and Yellow picked)
Model Number:adaptable shaft coupling for 3D printer
inner Bore Dmin: 3-14mm
Internal Bore Dmax: 10-45mm
Diameter: 30mm
Size: twenty-114mm
Allowable velocity: 15200min-one
Invertory: In stock

Functions:
one. Light weight, smal  instant of inertia and substantial torque.
two. Getting  the generate vibration buffer, and absorbing the impact created by motor’s uneven procedure
3. Efficiently correcting  the set up deviation of axial and radial and angular

Your type response of under inquiries will support us to recommed the most suited model to you asap.
one.Are you looking for JM kind(setscrew) or JM-C type(clamp)?
2.What is coupling outer dimeter measurement?
3.What is coupling inner bore size and size?
four.What is coupling substance(aluminium or Stainless steel )?

Proportions:

Packaging Details:
Wood or ply instances for export normal or according to the buyers
Shipping Detail:3-five times right after obtaining the 30% deposit

Programs for adaptable couplings: 
Power transmission to industrial equipment such as pumps, gear boxes, compressors, blowers, mixers, and conveyors various mechanical and hydraulic fields

/ The use of first products manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our company and the outlined EPT parts contained herein are not sponsored, approved, or created by the OEM. /

We – EPG Team the most significant couplings and gears manufacturing facility in China with 5 diverse branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /

Adaptable couplings distinction with rigid couplings (rigid shaft couplings), which link shafts with a linear alignment. nylicon With numerous years’ experience in these strains, we have been distinguished from other suppliers in China by our advantages in competitive pricing, on-time shipping and delivery, prompt responses, on-hand engineering assist and very good soon after-revenue services. one, Fundamental Information

2, Production approach

three,Merchandise specifics

/ The use of unique tools manufacturer’s (OEM) element figures or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our business and the shown alternative elements contained herein are not sponsored, accepted, or produced by the OEM. /