China Hot selling China-Factory-Manufacturer UL/FM/CE Fire-Protection Ductile Iron Grooved CZPT Fitting Flexible CZPT with high quality

Merchandise Description

 

Merchandise Specifics

 

Manufacturing facility & Workshop Show

 

Business Profile

WHO WE ARE

Lamat Piping recognized in 2002s,is 1 of China’s top piping manufacturing and exporting suppliers,specialized in certified steel flanges, butt weld pipe fittings and malleable cast iron fittings for clientele from in excess of sixty nations and areas globally.

Lamat Piping is the one and independent exporting section of NPCC(Countrywide Piping Development Cooperation),who is a team firm with 5 factories located in ZheJiang and ZheJiang , where the regions have extremely lengthy histories in manufacturing Steel & Iron merchandise courting back again to nineteen nineties. CZPT Piping(NPCC) aims to combine and intergrade some top and higher quality industries to turn into a contemporary and intercontinental piping supplier in the new century. Now we have far more than thirty making and machining strains with more than a thousand standard staff and 80 technical employees. Our factories addresses over 300,000 square meters,and has an once-a-year output of 500,000Tons.

WHAT WE Generate

Lamat Piping(NPCC) is creating flanges from 1/2” to 144” – Standards such as ASTM B16.5, EN1092-1, BS4504, BS10, SANS1123, DIN, JIS, UNI, GOST, KS, AS, etc. Products such as Plate Flanges FF/RF, Slip On Flanges FF/RF, Blind Flanges FF/RF, Welding Neck Flanges, Screwed Flange, Socketed Flanges, Lap Joint Flanges,Backing Rings Flanges,and so forth. Pressures contains 150LBS to 2500LBS in ASTM B16.5,PN6(T6/3/4/8) to PN100(T100/3/4/8) in EN1092-1/BS4504/BS10, T600/3/4/8 to T4000/3/4/8 in SANS1123.

Lamat Piping(NPCC) is producing butt weld fittings from 1/2” to 144” – Expectations such as ASTM B16.9, JIS B2311, EN15713, DIN, GOST…etc. Goods which includes forty five/ninety/a hundred and eighty Diploma Short/Extended Radius Elbow,Equal/Minimizing Tee,Cross,Concentric/Eccentric Reducer,Finish Cap.

Lamat Piping(NPCC) is also producing malleable solid iron fittings from 1/2” to 6” – Specifications ASME B16.3, ASME B16.fourteen,BS EN15712,BS1256,DIN2950, BNR6943, ISO49,and so on. Items like Elbow,Bend,Tee,Socket,Nipple,Bushing,Union,Cap,Plug,Back again Nut.

WHAT WE Source

With thirty+ a long time continual efforts and encounter,now CZPT Piping(NPCC) has turn into our customers’ professional manufacturer and provider for a quite wide variety of piping products.And nowadays CZPT Piping is not only giving Flanges,BW fittings & Malleable Iron Fittings created by ourselves,but also sourcing and exporting various Pipe Fittings & Valves s from China’s major industries,including Solid Iron Valves, Ductile Iron Pipe Fitting, Stainless Steel 1,2,3PC Ball Valve, Stainless Metal 150LBS NPT/BSP Fittings, Wrought Steel Fittings,Grooved Fittings,Cast Metal Fittings,HDPE Pipes Fittings Valves,PVC Pipes Fittings Valves, Brass Valves Fittings,and so on.

WHAT WE Assure

”BETTER Top quality, Far better SERVICES” is our guarantee to all of our customers and ”CREATE Benefit FOR CUSTOMERS” is our greatest objective. CZPT Piping promises that we will carry on to set good quality in the initial placebesides,we will not lose our set-focus on the service factor of our organization,which has been,and will proceed to be the foundation of our accomplishment and our potential development.

WHAT YOU Choose

If you would like to believe in CZPT Piping,Lamat individuals will do the ideal to be worthy of your have faith in!

 

Making Method & Inspection

 

Pipeline System Software

 

Packaging & Transport

FAQ

LAMAT PIPING – Ductile Iron Grooved Fittings
Name Rigid coupling, Flexible coupling, 90° Elbow, 45° Elbow, 22.5° Elbow, 11.25° Elbow, Split Flange, Adaptor Flange, Cap
Tee, Reducing Tee(Grooved/Threaded), Mechnical Tee(Grooved/Threaded), U-bolted Mechnical Tee
Cross, Reducing Cross(Grooved/Threaded), Mechnical Cross(Grooved/Threaded)
Reducer(Grooved/Threaded), Grooved Eccentric Reducer
H.S. CODE 7307110000
Technology Casting
Connections Grooved-Thread End, Grooved End
Pressure Rate 300PSI / 2.07MPa
Size 1” – 12”
Pipe O.D. 33.7MM – 323.9MM
Surface Finish Epoxy Powder,Painting,Galvanization,Dacromet (in Red/Orange/Blue/White Color)
Design Standard American Standard ANSI/ASTM
European Standard EN
British Standard BS
Germany Standard DIN
Japanese Standard JIS
ISO Standard ISO
Thread Standard ASME B.1.20.1 / EN10226 / DIN2999 / ISO7-1 / ISO228 / IS554 / BS EN10226 / BS 21.173
Material Standard Ductile Iron confirms to ASTM A-536 Gr65-45-12,EN1563,JIS G5502,QT450-12
Gasket Material EPDM,NBR or Silicon Rubber
Bolts & Nuts ISO 898-1class 8.8
Flanges Standard PN series or Class series
Packages Plywood Cases or Plywood Pallets or Boxes
Application Fire Fighting System,Petrochemical & Gas Industry,Chemical,Machinery,Electric Power,Construction Water Works,Valve Industry,etc.
Advantages High Quality + Ready Stock + Faster Delivery + Customized
Brand LMP
Certificate ISO9001,API,CE,UL/FM

###

Q0: Are you a factory or trading company?
A: We are a factory mainly producing pipe fittings & flanges. We also have cooperated factories to supply other piping products.
 
Q1: How do your Control the Quality?
A: We have QA & QC department who will follow up all the producing process to make sure we’re supplying correctly.
 
Q2: What Machines are you using for Manufacturing and Machining?
A: We have Forging/Stamping Machine,CNC Machine,Hole-Drilling Machine,Sandblasting Machine. All producing is in our factory except Galvanization.
 
Q3: Can we get Samples for Testing?
A: Yes,sapmles are supplied free of charge.
 
Q4: Can you accept OEM & marking our LOGO?
A: Yes,no problem if you can provide Authorization.
 
Q5: Can you offer Drawings & Datasheets?
A: Yes,Drawings & Datasheets will be sent for your confirmation before Bulk Production.
 
Q6: Can you supply MTC with EN10204 3.1/3.2 Certificate?
A: Yes,MTC will be provided after production is finished.
 
Q7: Can we visit your factory to inspect the goods before delivery?
A: Yes sure. Welcome to our factory,and we also accept Third Party Inspection like SGS,TUV,BV,etc.
 
Q8: Can you combine goods from our other suppliers to ship together?
A: Yes,we’d like to assist you to ship together to save your time and money.
 
Q9: How long is your Delivery Time?
A: It depends on quantity and products. It can be delivered in one week if we have Ready-Stock; if not,the General Production Time is 25 – 50 Days.
 
Q10: What’s your Payment Terms?
A: Currently we’re working with our clients under T/T,L/C,O/A,Western Union,etc.
LAMAT PIPING – Ductile Iron Grooved Fittings
Name Rigid coupling, Flexible coupling, 90° Elbow, 45° Elbow, 22.5° Elbow, 11.25° Elbow, Split Flange, Adaptor Flange, Cap
Tee, Reducing Tee(Grooved/Threaded), Mechnical Tee(Grooved/Threaded), U-bolted Mechnical Tee
Cross, Reducing Cross(Grooved/Threaded), Mechnical Cross(Grooved/Threaded)
Reducer(Grooved/Threaded), Grooved Eccentric Reducer
H.S. CODE 7307110000
Technology Casting
Connections Grooved-Thread End, Grooved End
Pressure Rate 300PSI / 2.07MPa
Size 1” – 12”
Pipe O.D. 33.7MM – 323.9MM
Surface Finish Epoxy Powder,Painting,Galvanization,Dacromet (in Red/Orange/Blue/White Color)
Design Standard American Standard ANSI/ASTM
European Standard EN
British Standard BS
Germany Standard DIN
Japanese Standard JIS
ISO Standard ISO
Thread Standard ASME B.1.20.1 / EN10226 / DIN2999 / ISO7-1 / ISO228 / IS554 / BS EN10226 / BS 21.173
Material Standard Ductile Iron confirms to ASTM A-536 Gr65-45-12,EN1563,JIS G5502,QT450-12
Gasket Material EPDM,NBR or Silicon Rubber
Bolts & Nuts ISO 898-1class 8.8
Flanges Standard PN series or Class series
Packages Plywood Cases or Plywood Pallets or Boxes
Application Fire Fighting System,Petrochemical & Gas Industry,Chemical,Machinery,Electric Power,Construction Water Works,Valve Industry,etc.
Advantages High Quality + Ready Stock + Faster Delivery + Customized
Brand LMP
Certificate ISO9001,API,CE,UL/FM

###

Q0: Are you a factory or trading company?
A: We are a factory mainly producing pipe fittings & flanges. We also have cooperated factories to supply other piping products.
 
Q1: How do your Control the Quality?
A: We have QA & QC department who will follow up all the producing process to make sure we’re supplying correctly.
 
Q2: What Machines are you using for Manufacturing and Machining?
A: We have Forging/Stamping Machine,CNC Machine,Hole-Drilling Machine,Sandblasting Machine. All producing is in our factory except Galvanization.
 
Q3: Can we get Samples for Testing?
A: Yes,sapmles are supplied free of charge.
 
Q4: Can you accept OEM & marking our LOGO?
A: Yes,no problem if you can provide Authorization.
 
Q5: Can you offer Drawings & Datasheets?
A: Yes,Drawings & Datasheets will be sent for your confirmation before Bulk Production.
 
Q6: Can you supply MTC with EN10204 3.1/3.2 Certificate?
A: Yes,MTC will be provided after production is finished.
 
Q7: Can we visit your factory to inspect the goods before delivery?
A: Yes sure. Welcome to our factory,and we also accept Third Party Inspection like SGS,TUV,BV,etc.
 
Q8: Can you combine goods from our other suppliers to ship together?
A: Yes,we’d like to assist you to ship together to save your time and money.
 
Q9: How long is your Delivery Time?
A: It depends on quantity and products. It can be delivered in one week if we have Ready-Stock; if not,the General Production Time is 25 – 50 Days.
 
Q10: What’s your Payment Terms?
A: Currently we’re working with our clients under T/T,L/C,O/A,Western Union,etc.

Stiffness and Torsional Vibration of Spline-Couplings

In this paper, we describe some basic characteristics of spline-coupling and examine its torsional vibration behavior. We also explore the effect of spline misalignment on rotor-spline coupling. These results will assist in the design of improved spline-coupling systems for various applications. The results are presented in Table 1.
splineshaft

Stiffness of spline-coupling

The stiffness of a spline-coupling is a function of the meshing force between the splines in a rotor-spline coupling system and the static vibration displacement. The meshing force depends on the coupling parameters such as the transmitting torque and the spline thickness. It increases nonlinearly with the spline thickness.
A simplified spline-coupling model can be used to evaluate the load distribution of splines under vibration and transient loads. The axle spline sleeve is displaced a z-direction and a resistance moment T is applied to the outer face of the sleeve. This simple model can satisfy a wide range of engineering requirements but may suffer from complex loading conditions. Its asymmetric clearance may affect its engagement behavior and stress distribution patterns.
The results of the simulations show that the maximum vibration acceleration in both Figures 10 and 22 was 3.03 g/s. This results indicate that a misalignment in the circumferential direction increases the instantaneous impact. Asymmetry in the coupling geometry is also found in the meshing. The right-side spline’s teeth mesh tightly while those on the left side are misaligned.
Considering the spline-coupling geometry, a semi-analytical model is used to compute stiffness. This model is a simplified form of a classical spline-coupling model, with submatrices defining the shape and stiffness of the joint. As the design clearance is a known value, the stiffness of a spline-coupling system can be analyzed using the same formula.
The results of the simulations also show that the spline-coupling system can be modeled using MASTA, a high-level commercial CAE tool for transmission analysis. In this case, the spline segments were modeled as a series of spline segments with variable stiffness, which was calculated based on the initial gap between spline teeth. Then, the spline segments were modelled as a series of splines of increasing stiffness, accounting for different manufacturing variations. The resulting analysis of the spline-coupling geometry is compared to those of the finite-element approach.
Despite the high stiffness of a spline-coupling system, the contact status of the contact surfaces often changes. In addition, spline coupling affects the lateral vibration and deformation of the rotor. However, stiffness nonlinearity is not well studied in splined rotors because of the lack of a fully analytical model.
splineshaft

Characteristics of spline-coupling

The study of spline-coupling involves a number of design factors. These include weight, materials, and performance requirements. Weight is particularly important in the aeronautics field. Weight is often an issue for design engineers because materials have varying dimensional stability, weight, and durability. Additionally, space constraints and other configuration restrictions may require the use of spline-couplings in certain applications.
The main parameters to consider for any spline-coupling design are the maximum principal stress, the maldistribution factor, and the maximum tooth-bearing stress. The magnitude of each of these parameters must be smaller than or equal to the external spline diameter, in order to provide stability. The outer diameter of the spline must be at least four inches larger than the inner diameter of the spline.
Once the physical design is validated, the spline coupling knowledge base is created. This model is pre-programmed and stores the design parameter signals, including performance and manufacturing constraints. It then compares the parameter values to the design rule signals, and constructs a geometric representation of the spline coupling. A visual model is created from the input signals, and can be manipulated by changing different parameters and specifications.
The stiffness of a spline joint is another important parameter for determining the spline-coupling stiffness. The stiffness distribution of the spline joint affects the rotor’s lateral vibration and deformation. A finite element method is a useful technique for obtaining lateral stiffness of spline joints. This method involves many mesh refinements and requires a high computational cost.
The diameter of the spline-coupling must be large enough to transmit the torque. A spline with a larger diameter may have greater torque-transmitting capacity because it has a smaller circumference. However, the larger diameter of a spline is thinner than the shaft, and the latter may be more suitable if the torque is spread over a greater number of teeth.
Spline-couplings are classified according to their tooth profile along the axial and radial directions. The radial and axial tooth profiles affect the component’s behavior and wear damage. Splines with a crowned tooth profile are prone to angular misalignment. Typically, these spline-couplings are oversized to ensure durability and safety.

Stiffness of spline-coupling in torsional vibration analysis

This article presents a general framework for the study of torsional vibration caused by the stiffness of spline-couplings in aero-engines. It is based on a previous study on spline-couplings. It is characterized by the following three factors: bending stiffness, total flexibility, and tangential stiffness. The first criterion is the equivalent diameter of external and internal splines. Both the spline-coupling stiffness and the displacement of splines are evaluated by using the derivative of the total flexibility.
The stiffness of a spline joint can vary based on the distribution of load along the spline. Variables affecting the stiffness of spline joints include the torque level, tooth indexing errors, and misalignment. To explore the effects of these variables, an analytical formula is developed. The method is applicable for various kinds of spline joints, such as splines with multiple components.
Despite the difficulty of calculating spline-coupling stiffness, it is possible to model the contact between the teeth of the shaft and the hub using an analytical approach. This approach helps in determining key magnitudes of coupling operation such as contact peak pressures, reaction moments, and angular momentum. This approach allows for accurate results for spline-couplings and is suitable for both torsional vibration and structural vibration analysis.
The stiffness of spline-coupling is commonly assumed to be rigid in dynamic models. However, various dynamic phenomena associated with spline joints must be captured in high-fidelity drivetrain models. To accomplish this, a general analytical stiffness formulation is proposed based on a semi-analytical spline load distribution model. The resulting stiffness matrix contains radial and tilting stiffness values as well as torsional stiffness. The analysis is further simplified with the blockwise inversion method.
It is essential to consider the torsional vibration of a power transmission system before selecting the coupling. An accurate analysis of torsional vibration is crucial for coupling safety. This article also discusses case studies of spline shaft wear and torsionally-induced failures. The discussion will conclude with the development of a robust and efficient method to simulate these problems in real-life scenarios.
splineshaft

Effect of spline misalignment on rotor-spline coupling

In this study, the effect of spline misalignment in rotor-spline coupling is investigated. The stability boundary and mechanism of rotor instability are analyzed. We find that the meshing force of a misaligned spline coupling increases nonlinearly with spline thickness. The results demonstrate that the misalignment is responsible for the instability of the rotor-spline coupling system.
An intentional spline misalignment is introduced to achieve an interference fit and zero backlash condition. This leads to uneven load distribution among the spline teeth. A further spline misalignment of 50um can result in rotor-spline coupling failure. The maximum tensile root stress shifted to the left under this condition.
Positive spline misalignment increases the gear mesh misalignment. Conversely, negative spline misalignment has no effect. The right-handed spline misalignment is opposite to the helix hand. The high contact area is moved from the center to the left side. In both cases, gear mesh is misaligned due to deflection and tilting of the gear under load.
This variation of the tooth surface is measured as the change in clearance in the transverse plain. The radial and axial clearance values are the same, while the difference between the two is less. In addition to the frictional force, the axial clearance of the splines is the same, which increases the gear mesh misalignment. Hence, the same procedure can be used to determine the frictional force of a rotor-spline coupling.
Gear mesh misalignment influences spline-rotor coupling performance. This misalignment changes the distribution of the gear mesh and alters contact and bending stresses. Therefore, it is essential to understand the effects of misalignment in spline couplings. Using a simplified system of helical gear pair, Hong et al. examined the load distribution along the tooth interface of the spline. This misalignment caused the flank contact pattern to change. The misaligned teeth exhibited deflection under load and developed a tilting moment on the gear.
The effect of spline misalignment in rotor-spline couplings is minimized by using a mechanism that reduces backlash. The mechanism comprises cooperably splined male and female members. One member is formed by two coaxially aligned splined segments with end surfaces shaped to engage in sliding relationship. The connecting device applies axial loads to these segments, causing them to rotate relative to one another.

Tags:

half coupling

As one of leading half coupling manufacturers, suppliers and exporters of products, We offer half coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of half coupling

Recent Posts