We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Product Description
Wet and Dry Process Cement Rotary Kiln from China supplier
Application Industry:
Cement Plant, Steel Mill, Chemical Plant & Incinerator
Technical Characteristics:
Kiln body is made of high quality composed of carbon steel or alloy steel plate and automatic welding;
Tyre, support roller, open gear adopts alloy cast steel;
Sliding bearing with large gap not scraping tile bearing;
Transmission device adopts hard tooth surface reducer, flexible diaphragm coupling, dc motor;
Adopts hydraulic gear wheel;
Preheater scales were used respectively to view of kiln head, and cylinder pressure tight seal;
A slow drive device.
Cement Rotary Kiln Processes Wet and Dry Cement Rotary Kiln
With the arrival of rotary kilns, cement manufacturing processes became sharply defined according to the form in which the raw materials are fed to the kiln. Raw materials were either ground with addition of water, to form a slurry containing typically 30-45% water, or they were ground dry, to form a powder or “raw meal”.
In the Wet Process, the kiln system is fed with liquid slurry, the water then being evaporated in the kiln.
In the Semi-Wet Process, raw material is prepared as a slurry, but a substantial proportion (50-80%) of the water is mechanically removed, usually by filtration, and the resulting “filter cake” is fed to the kiln system.
In the Dry Process, the kiln system is fed with dry raw meal powder.
In the Semi-Dry Process, a limited amount of water (10-15%) is added to dry raw meal so that it can be nodulised, and the damp nodules are fed to the kiln system.
Technical parameter for cement rotary kiln :
| Model | Parameter | Main Motor | EPT Roller Type | Supporting Type | Weightt | ||
| Speed r/min | Inclination % | Capacity t/d | PowerkW | ||||
| Φ3.2×50 | 0.674~3.37 | 3.5 | 1000 | 160 | Hydraulic | Slide | 252.4 |
| Φ3.5×52.5 | 0.6~3.6 | 3.5 | 1500 | 180 | 366.5 | ||
| Φ4×56 | 0.35~3.5 | 3.5 | 2000 | 250 | 489 | ||
| Φ4×60 | 0.396~3.96 | 3.5 | 2500 | 315 | 523 | ||
| Φ4.3×64 | 0.4~3.96 | 3.5 | 3200 | 420 | 606.69 | ||
| Φ4.8×72 | 0.39~3.96 | 3.5 | 5000 | 630 | 853.3 | ||
| Φ4.8×74 | 0.35~4 | 4 | 5000 | 630 | 864 | ||
| Φ5.2×61 | 0.38~3.79 | 3.5 | 5500 | 800 | 859 | ||
| Φ5×80 | max3.5 | 4 | 6000 | 800 | |||
| Φ5.6×87 | max4.23 | 4 | 8000 | 800 | 1201 | ||
| Φ6×90 | max3.5 | 4 | 10000 | 845 ×2 | |||
| Φ6×95 | max5 | 4 | 10000 | 950×2 | |||
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
